Fuel Pump, Manual, 20 Gal Per 100 Strokes, 3/4"X8' Hose
Automotive fluids, fuel, and oil hand drum pumps are designed for dispensing and transferring small volumes of fluids such as diesel fuel, coolant, washer fluid, power steering fluid, transmission fluid, and engine oil. These pumps are commonly used during automotive service and fleet maintenance to drain fuel tanks and remove spent fluids from vehicles and engine-powered machinery.
Hand drum pumps are manually powered devices operated by a crank, lever, or other mechanism to draw fluids out of a container. They allow pumping where there's no access to a power source and are ideal for dispensing and transferring small amounts of fluid. Sometimes called a manual or rotary drum pump, these hand-operated pumps connect to an adapter that allows the shaft of the pump to be mounted through the bung hole of a drum or other container. Discharge hose included.
Action Type: Piston
Pump Package Type: Unmetered Dispensing with Manual Shut-Off
Recommended Container Size: 55 gal.
Recommended Container Type: Drum
Pump Housing Material: Aluminum
Piston Material: Aluminum
Max. Flow Rate: 25 oz. per stroke
Max. Oil Flow: 25 oz. per stroke
Max. Outlet Pressure: 50 psi
Max. Viscosity: 1500 SSU
Min. Operating Temp: 0 Degrees F
Max. Fluid Temp: 150 Degrees F
Max. Head - Pumps: 6 ft.
Max. Head Pressure: 50 psi
Compatible Chemicals: Antifreeze (Coolant), Ethylene Glycol, Glycerin, Gasoline, Kerosene, Stoddard Solvent (Mineral Spirits), Diesel Fuel, Hydraulic Oils (Petroleum), Hydraulic Oils (Synthetic), Biodiesel, Motor Oil, E85, Automatic Transmission Fluid, Brake Fluid
Not Recommended Chemicals: Acetic Acid (Glacial), Acetic Acid 20%, Acetic Acid 80%, Chromic Acid 5%, Chromic Acid 10%, Chromic Acid 30%, Chromic Acid 50%, Citric Acid 50%, Formic Acid, Hydrochloric/Muriatic Acid (20%), Hydrochloric/Muriatic Acid (37%), Hydrochloric/Muriatic Acid (100%), Hydrofluoric Acid (20%), Hydrofluoric Acid (75%), Hydrofluoric Acid 100%, Nitric Acid (10% Solution), Nitric Acid (20% Solution), Nitric Acid (50% Solution), Nitric Acid (Concentrated Solution), Phosphoric Acid (40% Solution), Sulfuric Acid (to 10%), Sulfuric Acid (10% - 75%), Sulfuric Acid (75% - 100%), Acetone, Methyl Ethyl Ketone (MEK), Ethyl (Ethanol), Isopropyl (Isopropanol), Methyl (Methanol), Calcium Chloride, Sodium Bicarbonate (10%), Cyclohexane, Heptane, Hexane, Ethyl Acetate, Ammonium Hydroxide, Sodium Hydroxide/Caustic Soda (20%), Sodium Hydroxide/Caustic Soda (50%), Sodium Hydroxide/Caustic Soda (80%), Sodium Hypochlorite/Bleach (to 20%), Potassium Hydroxide (50%), Lacquer Thinners, Toluene, Xylene, Fresh Water, Salt Water, Deionized Water, Methyl Chloride, Sodium Bisulfate, Sodium Bisulfite, Trichlorethylene (50%), DEF, Anhydrous Ammonia, Ammonia (Liquids), Fertilizers, Fungicides, Herbicides, Lithium Grease, Naphtha, Paint, Paint Thinner, Pesticides, Turpentine, Windshield Washer Fluid
Discharge Connection Type: FNPT
Discharge Tube Outlet ID: 3/4"
Discharge Tube Outlet OD: 7/8"
Hose Length: 96"
Hose Cover Material: Neoprene
Hose Tube Material: Nitrile
Hose Inside Dia: 3/4"
Hose Outside Dia: 7/8"
Includes Suction Tube
Suction Tube ID: 1"
Suction Tube OD: 1"
Suction Tube Length: 20" to 34-3/4"
Suction Tube Material: Steel
Includes Bung Adapter: Yes
Bung Connection Dia: 2"
Adapter Connection Type: MNPT
Adapter Material: Aluminum
Pump Connection ID: 2"
Pump Connection OD: 2-1/8"
Nozzle Operation: Manual
Nozzle Material: Aluminum
Power Source: Hand Operated
Runs Dry: Yes
Seal Material: BUNA-N
Wetted Materials: Aluminum, Buna-N, PTFE Resin, 301 Stainless Steel, Zinc-Plated Steel
For Use WithIdeal for Gasoline, Diesel Fuel, Light Oil and Kerosene
Height Above Container: 19-1/2"
Features: Piston Action, Flow Direction Can Be Reversed
Includes 3/4" x 8 ft. Hose, Nozzle Spout, Telescoping Steel Suction Tube, Anti-Siphon Valve
Diesel Exhaust Fluid Compatible: No
Food Grade: No
Agency Compliance: UL/cUL
Series: 5200 SERIES, PISTON HAND PUMPS